Wednesday, June 25, 2014

"Curator's Tour" on the Batlleship Iowa, Part 3

The next place we went to was the ship's Bakery.

The ship I (used to!) work on usually fed us "store bought" bread, BUT, at certain times of the year, they'd bake fresh bread, and the wonderful aroma filled the entire ship.

Not sure if it was like that on the Iowa, but fresh bread is a marvelous thing!


Lots of racks for dinner rolls, and popcorn machine!



Biggest dough mixer I've ever seen. Probably made in the late 1930's, and still functional after over 70 years.



From the bakery we went to some "other" spaces, one of which was at the inner side of the hull. The area below is a "void", and there are many on the ship. Some were filled with sea water, others with fuel oil, and their purpose was to give an extra layer of protection to the inner hull from mines or torpedo attack.



This is one of the many "voids" on the ship.



Of to some generic "Crew's Quarters".




This was the Master Chief's quarters. They told us who he was, but not being a true "Navy Guy", the name didn't ring any bells.



The Engineering Office.



This office is in use, and is where the staff goes over some of the blueprints when needed, ad it also has a very large printer/plotter for making banners and such.




The Electric Shop.


This area is also in use, and is where we brint some of the original radios from the Comm Center when they need work. We're sloooowly getting all the receivers back on-line, and perhaps later this year we'll have one of the 1000 Watt transmitters back on-line. I don't think we'll use it for Amateur Radio operations, but it would be nice to be able to use it for MARS operations.



Some more Crew Art, unfinished. I'm not familiar with what the finished design would be, but I suspect from the hammer, axe, and square it has something to do with Engineering.



 BIG drill press!




Now we come to what the Curator calls "One of the most priceless and revered artifacts on the ship".

Neatly stamped in to the stainless work top are all the names and addresses of the men in the section who were on board the Iowa as she was anchored next to the Missouri in Tokyo Bay for the surrender ceremonies.

It looks like a typewriter did it, but it was all hand stamped. The border around the names is made form "O" and "I" stamps arranged to look like anchor chain.

Just beautiful!



Here's a better picture from the "USN Shipboard Radio Room" website.

The table is located in the Mechanical repair shop, at one end.

Here's sosme more shots of the area. The large I-Beam track at the top was used for handling large equipment.



Welding table with pedastal grinder at the rear. The items on the table are not "props". They were there when the ship was put into mothballs, and have been left there.



This is a large lather, with a 21" swing (I forget how long the bed is) located in the "General Workshop". I'm sure you could power it up today, and it would work perfectly. That's a horizontal milling machine on the right.




More art by Mr. Dehning on the Supply Office door.


In this piece he put his artist's signature on the paycheck!



On our way to several of the areas we saw, there were these large, curved structures that several people thought were air ducts. They're actually part of the ammo hoist for the 5" guns. The yellow hoses are from the dehumidification equipment the Navy installed when the Iowa was mothballed. There are quite a few of them still installed, mostly in the "Off Limits" areas.




The US Post Office aboard the Iowa.



This will eventually be on one of the regular tours, so the staff filled the wall display with some information and "First Day Covers" for the Iowa.




This is the certificate the City of Los Angeles gave to the Pacific Battleship Center when the ship came into port.




As we went to the Training Center for the rest of the presentation, we passed the Barbette for Turret #2.

It's 18" thick!



The '"TrainingCenter room, where the crew orientation is given, was formerly an office for the Cargo Handling Department.

Here's a bit of humorous Crew Art, artist unknown.




After the presentation was over (it's very similar to the video I linked to yesterday), we were free to roam the "regular" tour route until the ship closed at 1700.

One thing I really wanted to get some pictures of was the map of the Pacific Theater they discovered while cleaning the Officer's Wardroom. The artist is unknown, and the Curator can find no mention of this map in any of the documentation they have.

Sorry for the crummy pictures, but it was the best I could under the circumstances!















So, that's about what you'd see if you took the "Inside the Iowa Curator's Tour".

I had few flash misfires on some the shots I took, so I didn't post them, like looking "Down Into The Void".

it was deep and dark, and looked like it went on forever.

Monday, June 23, 2014

Battleship Iowa History Video

This is pretty much what we saw during the "Curator's Tour".

Sorry, but embedding has been disabled. You'll have to go to YouTube to watch it. It's about an hour long.

http://youtu.be/QFNAmu8BC18

"Curator's Tour" on the Battleship Iowa, Part 2

From the Brig, we went down the passageway to see the Tailor Shop, with more artwork by Mr. Dehning



Pressing gear



Ironing table


I'm not sure what the covered item to the left of the ironing table is. It's about the same size and shape as the "Dress Form" my Mom used to use when she made dresses for my sister.

Perhaps a similar device used for pressing dress uniforms?


BIG Dry Cleaning Machine



Better picture of the door to the Tailor Shop. Mr. Dehning has cleverly included his artist's signature on the receipt!



And just down the passage a bit further, we went into the Ship's Laundry. A bit boring, except if you need your clothes cleaned!


More steam operated pressing tables.



I don't remember what this area was for. Perhaps folding the freshly laundered items, or maybe desks for admin work.



A bit further forward is the Ship's Library. It's just an empty area right now with book shelves, but we all crammed in to it, and as I was the last one in, I couldn't get a photo of anything recognizable as the Library, so I just took a pic of the door.
The gentleman in the picture is the current Chief Engineer on the Iowa.



We then came up for air out on to the Fantail.



And a better picture of one of the wood "plugs" sealing up the muzzle of a 16" Naval Rifle barrel.



Just above the "Battleship USS Iowa" plaque in the first outside  picture above you can see one of the antennas we use when we operate for our Amateur Radio events on the Iowa. It's a 14' tall "Trussed Monopole", and normally operates from 10 MHz to 30 MHz, but with my Elecraft autotuner, I've loaded it up just fine on 7 MHz.

Here's a better view of it.



And we also use the big "Disc-Cage" antenna on the bow of the ship. These were originally installed during the 1980's retrofit of the ship to be used with a type of HF Data System, of which I don't know very much. I suspect it was a type of encrypted Packet radio system, but it's not my area of expertise.


The Disc-Cage can operate from 3 to 30 MHz, depending on which feed point you use, and is an amazingly good antenna.
If we can you, then you'll definitely hear us!





Anyway....back below decks....


From the Ship's Laundry (it was very dark, poorly lit, and cramped, so I didn't take any pix inside) we went to the Enlisted Men's Galley.





I though this sign on one of the Deep Fry Machines was "interesting".







Some kind of big chopper/shredder.





Sign on entrance to the "Meat and Vegetable Prep Room".




More Crew Art, artist unknown.



More by Mr. Dehning.


The two stars at the bottom are for the first and second commissioning of the ship, in 1943, and 1951. The star at the top is for her final commissioning in 1984. The bird is NOT an eagle, but rather an "Iowa Hawk", bringing back the ship's commission and hull number.



Being a Radio Nerd, I just had to get this one.



Right before we went to the Enlisted Men's Mess, we saw what was left of this painting. It originally was an over-the-shoulder view of a Helmsman, with his hands on the wheel. You can barely make out the old wooden wheel at the bottom. I'm told that in the center was a rendering of Jesus Christ, with His hands on the Helmsman's shoulders, helping him to guide the ship.




Sometime after it was painted, and before the ship was decommissioned the last time, it was declared "Politically Incorrect", and either painted over, or scrubbed with something to deface it.

Mr. Dehning, who is still alive, has offered to come and repaint it.

God Bless Mr. Dehning!


And on to the Enlisted Men's Mess.





We have a "Two Spigot" version of this exact Milk Machine on the ship I work on. BTW....the Iowa consumed approximately 250 gallons of milk per day!



Off to one side of the Crew's Mess was this red painted door, so I walked over to see ehat it was.



It's a Damage Control Locker, and they're all throughout the ship. It's a compartment containing tools and materials relevant to the location of the ship needed to repair combat or other damage. The brass plate above this one says it's for "Pipe and Bar Stowage".



Some more Crew Art by Mr. Dehning in the Crew's Mess.



That's all for now. I'll post some more later today or tomorrow.

Sunday, June 22, 2014

"Curator's Tour" on the Battleship Iowa, Part 1

I "only" took about 100 pix today, as I was more interested in listening to the Head Curator talk about the ship and her history.

It was a fascinating tour, and well worth the $100 cost. I'm not retired "yet", and have a few extra bucks that I felt was worth donating to the ship to help her along. If you live in the area, or are planning on traveling out here, check the Pacific Battleship Center website for information on upcoming "special" tours.

Today was the first time the "Curator's Tour" (actually called "Inside The Iowa") was offered, and judging by the response of the public, I'm sure they keep offering it, and possibly expand it some, or maybe have two different ones.

The tour was scheduled to start at 1100, but since everybody on the list arrived early, we started a few minutes before 1100.

Some of the guides were people I "kinda-sorta" knew from my minor role on the ship, and a couple were people I'd heard of but never met. They were all great, as 99.999% of the guides are, and it was a nice chance to get to know the ones I'd only either heard of, or had met briefly in passing.

We started in the CPO Lounge area, and then went into the CPO Mess and Galley.






The above pics are some "Crew Art" done by Mr. Blair Dehning, and extremely talented man.

Here's some more "crew art" illustrating how nice it would be to have a porthole view, even though you're below the water line.






The CPO Mess and Galley areas. The gentleman in the picture is Dave Way, Curator of the Battleship Iowa, and a very knowledgeable guy.

The red light just to the right of him is NOT a "Battle Light" or "Emergency Light". It's on at night so you don't destroy your night vision if you're on duty, and wanted some "Mid Rats" before you went outside.

Numerous hatches on the ship have an almost "airlock" look to them, where you enter a room that's painted entirely black, and lit with red lighting, that you stay in a few minutes before you go out on deck at night. The rooms also have the doors positioned such that even if you had both doors open, NO inside "white light" could spill out into the night, and give away the ship's position.




Dave gave us the story behind the CPO's insignia of the Fouled Anchor.
The U stands for Unity in all we do.
The S stands for Service to our ship and shipmates, God, and Country.
The N stands for Navigation as we navigate our way through life on the right course

The anchor chain represents the days of our lives, each forged uniquely, strong, yet flexible.


On to the Enlisted Men's Barber Shop.


 


And as a reminder of how things used to be in the Navy, and ashtray built into the arm of one of the chairs!





On to the Brig......



Solitary Confinement Cell.


The Head in the Brig.


ALL of the toilets, and most of the sinks, on the Iowa are covered with plywood to "remind" you that they are NOT currently functional. We have L.A. City water run to the ship, but the sewer connections haven't been "approved" yet, so no functional heads on the ship. Once the sewer connection gets hooked up (it's there, just not "approved"), all the plumbing on the ship will get flushed out, tested, and recertified for use. The Iowa is planning on having an "Overnight Stay" package available, and all the little details like getting the toilets working have to be finished before the package can be offered.

I don't know if the general public will be able to get this package. At this time, I know it's planned for the Boy Scouts, Sea Scouts, Young Marines, and other organizations of the nature.

I don't think too many of the general public would enjoy overnight racking on the ship, but you never know!

I don't want this post to get too big, so that's all I have for today.

More tomorrow!

Saturday, June 21, 2014

"Honeydew" Day

Well, so far I've fixed three broken hinges on doors, crushed two weeks worth of aluminum cans, and cleaned up the dining room table and living room coffe table.

Two of the bad hinges were simple "remove and replace" jobs, but the one on the door to Radio Central had stripped out holes in the door frame for the bottom hinge.

Don't ask how it happened......

I had to drill out the existing holes, cut some snug-fitting hardwood dowels, and glue them in with some Gorilla Glue.

After the glue cures overnight I'll mount up the new hinge, drill some pilot holes in the dowel plugs I glued in, and presto....new hinge!

And I had a HUGE stack of books and magazines on the dining room table to sort out/toss/save, and the coffee table was stacked up with all the packing material from the GoPro Hero3+ camera and accessories I bought last week.

Yep, I bought a GoPro so I can document some of the things I do, like Field Day, which is coming up next weekend.

I'm taking a special "Behind The Scenes" tour on some of the off-limits areas of the Iowa tomorrow, but I'm going to take my Nikon with me for that.

And yep, I *will* post the pix I take tomorrow!

Tuesday, June 17, 2014

Sunday, June 15, 2014

140 Years of Gold and Silver in TEN Minutes!

Really explains how we got into the mess we're in.

H/T to my buddy Steve.


Happy Father's Day!

To all my fellow Dads out there!

I'm goofing off today working on the Supra. I'd painted the rear "sunshade" a month ago, but the paint I used (VHT Satin Black urethane) looked terrible. I don't know if I got a bad can (it happens) or if the paint just isn't suitable for this application. It's meant for refinishing mag wheels, and is really tough paint, but just doesn't lay down nice on large, flat surfaces.

SO.....I just finished sanding it all back off, and primed it again. I'm not sure if I'll try and spray can it myself again, or take it to the body shop down the street where my wife had some touch up work done to her car last year.

*IF* I decide to take it the body shop, then I'll also take my outside mirror housings, and the front bumper, which are also supposed to be Toyota "Tuxedo Black" gloss.

Might as well have them do the final prep and paint on several things, as it would save some cost over having things done one at a time.

As soon as I finish cleaning up things a bit, and my son gets his rear over here, I'm going to pull the seats out of the car so we can get my new carpet installed......maybe.....

The Crew Appreciation Dinner on the Iowa last night was great! A local place did the catering, and we had pulled pork, shredded beef, cole slaw, and some of the best backed beans I've ever had!

Saturday, June 14, 2014

It's Official, I'm Retiring In August!

Just filled out the online forms, printed it all, and I'm in the system for starting my benefits in September.

Still not sure when I'm going to tell them at work.......

BUT, considering all the shit they've pulled on all of us, I think I'll be nice and give them two weeks notice......

Friday, June 13, 2014

Gonna See "The Gunny" On Saturday!

R. Lee Ermey will be at the Major Surplus and Survival store tomorrow for their yearly Blow-Out Sale.

I'll be there in the morning helping a bit with the booth for the Iowa, and hopefully I'll be able to get him to autograph his book I bought some months ago.

It's a pretty good book, and one I wished was available years ago when I was younger. He has a lot of good advice in it, and I'm sure I would have taken much of it.

The only "guide" I had way back then was a copy of "The Blujacket's Manual" my Dad gave me.

While that book was pretty good, I felt it just didn't apply to me (hey, I was a young pup!), but I read it anyway, and still have it.

The last time I met Gunny was at "Old Fort MacArthur Days", and I was 100% impressed with the man.

He's a real gentleman in person, and even my girlfriend at the time thought he was pretty cool.

Tuesday, June 10, 2014

Ever Had That "Terminally Burned Out" Feeling?

Well, I'm there with the one radio club I've been a member of since 1995.

I've been on the board for the last six years.

I've been the Field Day chair for the last six years.

I've been running the weekly net for the last four years.

I'm the President (again....) this year.

And my dear sweet wife assembles, edits, and publishes the club newsletter.

Most of the members are good people, but like most clubs we have a few flakes.

The problem is that nobody wants to help do things with club activities.

Out of the 40 some members, it's the same four to six people who make everything happen, and I'm tired of "fighting above my weight" doing so many things.

Oh, sure, the members have "ideas", and "suggestions", but they want somebody else to do all the work, and when their ideas and suggestions don't happen, they get upset about it.

When you point out that they could do the job, they immediately fall back back on the old "Oh, but I don't know how to do that" excuse.

I told everybody back in January that I would NOT be the Field Day chair this year, and nobody stepped forward to pick up the ball.

As a result, we'll only have two stations operating this year, where we normally have four or five.

And know what?

I don't care.

Amateur Radio is a HOBBY to me, and when your hobbies stop being fun, that's bad.

Besides, I'll be retiring very soon, and I have other interests and activities I want to pursue, along with doing a bunch of things around the house.

It's 100% different with the association we have on the Iowa, where everybody pitches in, and pulls more than their own weight.

And I don't mind bending over backwards one bit on the Iowa......

Sunday, June 8, 2014

'Nam Era Music Medley

Stumbled across this on Da Tube while looking for something else.

While I might question some of the imagery used (M1 Abrams?). on the whole it's pretty damn good, and if you're "my age" +/- a few years, you'll definitely 'get it'.


Thursday, June 5, 2014

June 6th, 1944 AND 1942

Most everybody knows June 6th 1944 was D-Day, but how many remember that June 6th 1942 was The Battle of Midway?

I've always been interested in the campaign in the pacific since that's where my Dad was (with the SeaBees) during WWII.

Midway was a significant battle, with four of the six carriers used for the Pearl Harbor attack, along with a heavy cruiser, being sunk.

The carriers Akagi, Kaga, Soryu, and the Hiryu were sunk, along with the heavy cruiser Mikuma.

It was the first major defeat for the Imperial Japanese Navy since 1863, and most historians recognize it as the turning point in the Pacific Theater.

Thursday, May 29, 2014

Great Bass Line!

The first time I heard this song was on "Wide World Of Sports" as the intro to a segment they did on Shirley Muldowney.

I'm not sure what Ms. Muldowney's reaction to it was, but I thought it was a killer song, with the best bass line I'd heard in a long time.

Enjoy the video, and watch out for that HAIR!


Tuesday, May 27, 2014

Memorial Day on the Batlleship Iowa

Well, we all had a very nice, and somewhat somber, day aboard the Iowa yesterday.

In my rush, I forgot my camera, but since I was inside most of the day, I really didn't get to see much.

We made about 300 contacts althought the band conditions weren't the best.

I was running my Elecraft K2 on the trussed monopole near the helipad, and the other operator was running our Kenwood TS-850S on the disc/cage antenna.

There were over 3500 paid-at-the-gate visitors, and the local radio stations bought a large number of tickets to hand out.

If anybody will be down this way, let me know, as I have a stack of "Buy One Get One" tickets which will get you and a guest in for one paid admission.

Saturday, May 24, 2014

Really Bad News From A Fellow Blogger

Our fellow blogger over at Live From The Alamo City has received some devastating news.

Please keep he and his wife in your prayers, and drop by and give him some support....


Thanks, he's a good guy.

Wednesday, May 21, 2014

Upcoming Amateur Radio Events on the Battleship IOWA

Just got back from the BIARA board/planning meeting for the month.

As of this date, we'll be operating NI6BB on May 26th for Memorial Day, from 0900 to 1800 PDST, along with several other events.

Museum Ships Weekend
0000Z June 7th, through 2359Z June 8th

ARRL Field Day
June 28th~29th OPERATING HOURS TBD

I'll post the other events here, as we firm them up.

Look for us on frequencies ending in "61" (get it? BB61?), like 14.261, 7.261, etc +/- the QRM!

On announced events, we usually get quite a pile-up, so be patient, and if we can hear you, we will work you!

I won't be operating on the Iowa for Field Day, as I'll be running the satellite station for my "other" club, URAC, K6AA.

Hope to meet you on the air!

Saturday, May 17, 2014

Busy Day, Again!

Spent all day on the IOWA, for an orientation class, which was extremely well done, and then a couple of hours in Radio Central making contacts for our Armed Forces Day event.

We're encouraging everyone we meet to write a little Military Service bio on their QSL cards, covering either themselves, or close relatives.

Talked to one older gent who'd served on the IOWA back in the '50's, and he was extremely excited that we have regular Amateur Radio operations going on now.

Then I came home, played with the dog, and built a bookcase for my wife.

My son is coming over Sunday morning to see the Supra, and give me a hand moving some things around.

Gee.....2047 local time, and I'm ready for bed. I remember when this was the time I'd be getting ready to go out prowling the streets with my '73 Trans Am!

Thursday, May 15, 2014

**~~HOT!~~**

WoW.....We've had three days of 100+ weather, and today is the hottest yet.

The thermometer in may car indicated it was 107*F coming home today, and my calibrated weather station indicates we hit 104.4*F today at 1326 local time, the highest temp so far this year.

And to make it worse, the Relative Humidity has been in the %5~6% range the last several days.

I don't ever recall getting "static zaps" in the summer out here!

It's supposed to break tonight, with high being 93*F on Friday, dropping to 80*F on Saturday, and in the low to mid 70's on Sunday, and through the next week.


AND......I watched my workmates motor out of the harbor today on their way to catch up with the Launch Platform, and then on to 154*W, 0*N (the launch site) for the launch of Eutelsat 3B, which is now scheduled for May 26th, at 1410 PDST, 2110 UTC.

If anybody wants to watch the live streaming web broadcast, drop me an email, and I'll send you the link.

Saturday, May 10, 2014

Saturday Relaxation

Didn't have to work extremely late Friday, only until about midnight. Was balsting along the access road, and when I turned the second-to-the-last corner, I saw the railroad crossing arms coming down in the distance.

RATS!

Wound up sitting there at the crossing for 35 minutes as they moved a train back and forth getting all the cars connected.

They back it down one siding, pull forward past the switch, throw the switch, and then back down another siding to connect more cars, finally getting the rest of their load, and then they pulled out of the yard, past the crossing, and off in to the distance.

Here's a screenshot of the crossing I have to traverse every day. Follow "Nimitz Rd" from the lower right, and towards the top you'll see it turn, and this is where the crossing is. It's a choke point for everything out on the Navy Mole besides us, and can really cause a jam, as it's the ONLY road leading on and off the mole.


The sidings with all the traffic are to the left of Nimitz Road, while the sidings on the right take a different route off Terminal Island, and never impede vehicular traffic.There's been a couple of times in the past (a derailment, and a fatal accident) that kept the crossing blocked for 24 hours, so we had the railroad guys open up one of their access roads for us, so we could get off Terminal Island. It wasn't easy, but we had access.

SO.....I didn't get home until about 0045, which means by the time I get into my jammies, and wind down, I finally got to sleep about 0130.

The Launch Platform is leaving Sunday morning, and the Command ship will be leaving Thursday morning, and I'll be standing on the pier waving to them.


Friday, May 9, 2014

Finally Friday!

Been pretty busy the last few days getting ready for tonight's final testing of the "Integrated Launch Vehicle".

I'll be going in about 1600 to finish training the guy who's going in my place, and supervise him during the test.

The RF portion of the test will start about 2200, although the customer has told us they *might* be ready to go as early as 2000.

If all goes well, I should be able to get out of there at midnight, otherwise it could be a looooong night!

The last time this particular customer was there, they dragged things out, left for dinner without telling anybody, didn't follow the printed schedule we gave them, and in general caused the whole operation to be in Charlie Foxtrot territory all night.

I wound up being there almost 16 hours!

This morning I'm going to go by the Social Security office to ask a few questions about my upcoming retirement, and then I'm going to a farewell lunch for another person who's leaving the company. She's one of the "Export" people who handles a lot of the paperwork, and she'll really be missed.

After this launch, we have NO idea what's going to happen. The launch for fourth quarter of this year isn't going to happen, and the customer the management was in talks with for next year has yet to commit. Considering it takes anywhere from 6 to 12 months to get some of the specialized hardware built, if they don't commit pretty soon, that launch just aint gonna happen.

Several people have told me in private they're going to bail after this launch, which will really out the company in a bad position.

As for me, I'm out of there in August!

Tuesday, May 6, 2014

Bummer......

Just heard via Tam's blog that my friend Jeffro has passed away.

I always enjoyed corresponding with Jeff about Big Rigs and stuff, as he was a wealth of information, and always willing to patiently answer my Dumb Questions.

God Bless you, my friend, and may you Rest In Peace.

Friday, May 2, 2014

Duracell Battery Problems

Has anybody had problems with the big "24 pack" of Duracell batteries lately?

I bought a pack at Home Depot some months back, and they're pure GARBAGE!

I use them in my LaCrosse digital clock here in the radio room, and they not only go dead in a month, but they LEAK!

I've never had problems with "AA" size Duracells before, and a pair of them used to run this clock for about a year.

And it's not just this clock, either. They don't last more than a month or so in the various remotes we have, and those leaked, too.

I'm beginning to wonder if somebody slipped Home Depot a fast one, and they got stuck with some counterfeit batteries.

Guess I'll have to write Duracell directly, but just wondered if anybody else out here has noticed this.

I've gone back to Energizers in the meantime.......

Busy, Busy!

Besides being busy helping to support the next launch, been putting a big dent in the Honey Dew list.

We bought a new air conditioner for the living room, and after my wife's #1 son helped me install it, I noticed the plug was the "T-Slot" type. Well, it needs a "20 Amp" receptacle, I thought, so I went to the Cheapo Depot, bought one, and swapped it out. ALL the breakers to our 120 Volt outlets are 20 Amp, so changing it was no big deal.

I went to plug the new A/C unit in, and WTF???? The "Tee" was wrong, and wouldn't fit the new outlet!

Then I looked at the GFI that's built into the plug, and realized she'd bought a 240 Volt unit! Then I looked at the part number I gave her, and realized I'D given her the wrong model number to buy!

D'OH!!!!!


Luckily her BFF's son-in-law is an electrician, so for $70 worth of parts, and $160 in labor, he came over with his dad Wednesday night after his normal shift, installed a new outlet, ran new cable, and put a new breaker in our Service Entrance box.

It cools much better than the 10 year old 120 Volt unit we had, and as a bonus, the lights don't dim when it kicks in.

ANYWAY....then I had to spackle the one hole he had to drill behind the baseboard so he could run the cable, nail the baseboard back on.

Monday, April 28, 2014

Toyota Leaving California For Texas

Toyota's been in Torrance for 57 years, and now they've pulled the plug for all the Usual Reasons.

Read the whole story here.

I wonder if when Honda will go, too.......

Sunday, April 27, 2014

I'm Out Sick Today

Wife was sick last week, so I blame her.

All congested, headache, achy body, and all I want to do is sleep.

I'm going back to bed......

Thursday, April 24, 2014

Glad It's Tursday!

As this has been an exceptionally BORING week at "work".

We have a morning meeting informing us of the progress in getting the launch vehicle back together, and then.........NOTHING.

I've read all of the books I have on the Iowa

I've read every "Hammer Time" post over at The Truth About Cars

I've re-read all of the books I have on the care and feeding of an M1 Garand

Et cetera, et cetera, et cetera.......


And I still have four months until retirement.......


We've heard the ships will be going in to "Cold Layup" at the completion of this launch campaign, although there's a faction fighting to keep the command ship in "Semi-Warm Layup".

And one of the IT guys told me they want to shut down the building where all us payload guys are cubicaled (is that a word?) to save money. The problem is, there's not enough floor space in the building they want to use to house all of us.

I expect a Reduction In Force to occur a few weeks after the ships are back........

Sunday, April 20, 2014

Easter Brunch On The Battleship Iowa

Well, my jaw has recovered 90% or better, and no signs of swelling, so the wife and I went down to the Iowa for the Sunday Easter brunch.

The food was catered by the San Pedro Brewing Company, and was typical breakfast fare, with eggs, potatoes, sausage, BACON!, and a lot of other items, and it was quite good.

After eating, we took the self-guided tour again, and saw some of the areas that have been cleaned up and open to the public since we first took the tour before the ship was opened.

And we saw the Plank Owner's wall, with the teak plate inscribed to the memory of my father, who served in the Sea Bees from 1941 through 1945.

One of the really neat things the restoration crews found was in the Officer's Wardroom.

As they were cleaning off some peeling paint, they found a beautiful map, hand painted on the wall, of the South Pacific Theater of War.

It was very similar to the map on Wikipedia, reproduced below, but was painted in differnt colors, and had much more detail.



Since they can't find any photos of this map in their extensive archives, it's still a mystery as to when it was painted, and who painted it.

My wife was very surprised that I could point out all of the places my Dad had been to, and frankly, I was too. He was like a lot of our Veterans, in that once their job was finished, he came home, and didn't care to talk about it much. Sometimes he'd start to talk, and just when it was getting very interesting, and I'd ask some questions, he'd clam up. But seeing that map, with names of places in use at the time, brought the memories flooding back to me.

And we stopped by Turret 2 to see the memorial to the 47 who lost their lives 25 years ago. I didn't make it down there yesterday to help with the "Radio Activities", but at least we got to see the memorial while it's still there.

Friday, April 18, 2014

Back from The Dentist

Well, it wasn't as bad as I thought it was going to be, and I learned a ton about how teeth are extracted.

The tooth in question is/was "#31", the last molar on the lower right side. I'd had a filling fall out some years ago, and like a dummy, I just ignored it until it really started to hurt. My own dental insurance had gone away after I was laid-off from Boeing, so I went to the Dentist my wife uses.

He wanted to just pull the tooth, but I figured it wasn't that bad, so I went back to my own Dentist who examined me, said I needed a root canal and a crown, and no, my wife's insurance wouldn't pay for it.

I also got a lecture about what would have been a $250 filling replacement had now turned into a $2200 procedure!

ANYWAY.......that was about 5 years ago, so I guess I got my money's worth out of the crown.

During a previous cleaning they noticed something was odd, but couldn't decide what was going on, so they told me not to worry about it, but to contact them immediately if I had any problems.

WELL...during the cleaning I had a couple of weeks ago, they noticed that the tooth appeared a bit "strange", so they took and X-Ray, and found the front root had separated from the rest of the tooth, and declared the tooth would have to be removed, which we did this morning.

The worst part was getting stuck with the needle (God, I HATE needles!) to numb it out, and the actual extraction and cleanup went very smoothly.

There were NO problems apparent with clotting, despite the fact I'm taking Plavix and an 81mg aspirin per day.

I was in and out in an hour, and then came home and took a bit of a nap.

So far I'm just kind of "generically sore" in the jaw, and taking it easy, as I don't want to interfere with the clotting/healing that's started.

I had planned on attending the Battleship Iowa memorial service tomorrow for the 47 people that lost their lives in the Turret #2 Explosion, and then operate the radio station for the event we're having, but I think I'll pass on it. One of the things the Dentist told me to do was NOT talk a whole lot, and since I operate on Single Sideband, that's kind of hard to do!

Sunday the wife and I will be going to the Easter Brunch on the Iowa, so at least I'll spend a little time there this weekend.

Think I'll head back to the rack for a little while.......

Monday, April 14, 2014

Bundy Ranch Video

Supposedly Facebook is has banned this video.

Several commenters have said they post it, and it just "disappears".




And for those that don't understand why Mr. Bundy refused to pay his "Grazing Fees", here's another rancher's explanation of it all.

All the big city folk that cry and fret about a supposedly endangered desert tortoise, while eating their Big Mac, don't have clue where the beef comes from.


And then there's this story about a planned Fed raid on the Bundy's home.

As much as I'm happy the Feds pulled out (or were pushed out), I certainly don't think this is The End Of The Story.

Bullies have a way of returning, you know......

SLW's BFF Passes Quietly

 On Friday, the 29th, and 1215pm local time. Surrounded by family and friends, and her two dogs. Things have been a bit hectic here, as expe...