RATS! My Uniden BCD996XT Scanner Died!

Went to turn the scanner on the other day, and it wouldn't power up.

Figured it was the cheep little switching supply that came with it, so I ordered another one.

WELL....still wouldn't power up, so I measured the output of the original power supply, and it was NINETEEN VOLTS!

Ugh....double plus ungood.

So, looks like I have another project to do. I'll have to pull it out of the case and see if I can find anything obviously wrong. Otherwise I'll have to pack it off to Uniden for repair.

The good news is that Uniden charges a flat $80 repair fee for these.

The bad news is the it's their power supply that killed the radio!

Guess I'll have to get my trusty BCD796D off the shelf and return it to service.

Oh....and I DAMN sure won't EVER power up a $500 scanner with a POS $2 switching supply again!

Garage, Part 9,783......

Yeah, it sure seems like that's what chapter I'm on....

I went to Harbor Freight this morning and picked up some moving dollies so I can stack some of the heavier piles of boxes on them. This lets me wheel them around, in and out of the garage, while I get back into the darker recesses that haven't seen light of day in years.

Today was garbage day, so I started with empty trash bins, and I've already got the recycle bin about 1/3 full of cut up, flattened out cardboard boxes and other stuff. I was surprised how heavy the bins were when I wheeled them out to the curb last night, so I'm guessing I've thrown out several hundred pounds of "stuff" over the last three weeks that I've been cleaning.

I've got a big pile of stuff I'm taking to my radio club's annual "White Elephant" sale, another pile that's getting sold on eBay, and a third pile that's going on weridoslist craigslist.

And there's a fourth pile that will get dragged out to the curb tonight for the junkman that prowls the neighborhood.

But, I'm definitely making progress, albeit at a slower pace than I'd like.

At least the dog can walk into the side door, and out the big door, without getting trapped.

And I should have full access to my big rolling toolboxes tonight, meaning I can put away a ton of tools I have out of them, further cleaning up the mess.

A Perfect Day

Yeah, I know.....not a snowball's chance, but fun to envision.

THE DONALD'S FIRST DAY IN OFFICE
 
1. President Donald Trump and Vice President Marco Rubio are sworn into office..
 
2. In a rare event on inauguration day, Congress convenes for an emergency meeting to repeal the illegal and unconstitutional Socialist health care farce known as Obamacare. 

The new Director of Health and Social Services Dr. Ben Carson announces that an independent group of healthcare management professionals is hired to handle healthcare services for poor and low income people. 

They are also assigned the duty of eliminating Medicare and Medicaid fraud. 

Government's costs for public healthcare are reduced by 90%.
Healthcare insurance premiums for working Americans are reduced by 50%. 

The move saves billions of taxpayer paid dollars. Healthcare service in the U.S improves 100%.
 
3. Newly appointed Department of Homeland Security Chief Ted Cruz announces the immediate deployment of troops to the U.S. Mexico border to control illegal immigration and the immediate deportation of illegals with criminal records or links to terrorist groups. 

New bio-encrypted Social Security IDs are required by every American citizen. Birthright is abolished. All immigration from countries that represent a threat to the safety of American citizens is terminated indefinitely. The move saves American taxpayers billions of dollars. Several prisons are closed.
 
4. Newly appointed Secretary of Business and Economic Development Carly Fiorina eliminates more than half of the Government agencies operating under the Obama administration saving taxpayers billions of dollars. 

Stocks rise 100%.
 
5. Newly appointed Director of Government Finance Rand Paul announces the abolition of the IRS and displays a copy of the new Federal Tax Return form.
It consists of one page. The instructions consist of two pages. 

The Federal Reserve is audited. The move saves American Taxpayers billions of dollars and increases tax revenue.
 
6. Hillary Clinton is in prison, where she belongs. Her cell is directly across from Jesse Jackson and Al Sharpton who are serving time for "Hate Crimes". She bitches at them constantly from behind the bars of her cell in what some call cruel and unusual punishment.
 
7. Bernie Sanders is in the nuthouse, where he belongs. His room is directly across from Nancy Pelosi, Debbie Wasserman Schultz, Chris Matthews and Al Franken. They meet for tea every day at 10 AM and discuss the success and benefits of Communism and Socialism throughout the world. They also wonder when the "Mothership" is going to pick them up and return them to their home planet.
 
8. Windows 12 is released. It is designed for humans, doesn't try to satisfy the needs of every person on the planet, doesn't require a degree in nuclear physics to operate and looks just like Windows 7 except it is easier to use.
 
9. Barack Obama flees the United States under cover of darkness and returns to his homeland of Kenya before his trial for treason begins. He deplanes on a remote jungle airstrip. It was reported that he was last seen wandering
through the jungle singing "Hakuna Matata" with a chimp named Commie.
 
10. Oscar Meyer announces the introduction of a new cholesterol and fat free pepperoni that tastes just like regular pepperoni.
 
11. Not to be outdone, Kraft Foods announces the introduction of several varieties of cholesterol and fat free cheeses that taste just like regular cheese.
 
12. A committee is not established to determine what is causing global cooling. Billions of taxpayer dollars are saved.
 
13. Dead people are no longer allowed to vote in Chicago, a huge blow for the Democrat Party in the State of Illinois.
 
And this my friends constitutes THE PERFECT DAY!

A Little 'Travelin' Music', Please.....

One of my favorite TV themes.

Since I'm on Garage Duty for the foreseeable future (well, plus "Iowa Duty"), I put together a bunch of music with an automotive theme that I can play in the garage while getting all grimy and dreaming of the time I'll be working on the car getting all grimy.

There's some backstory to this song. CBS was too cheap to pay continuing royalties to Bobby Troup for "Get Your Kicks On Route 66", so they commissioned Nelson Riddle to write a replacement. Most TV show theme songs are considered almost "throw away" songs, but Route 66 went on to become the first TV theme song to make Billboard magazine's "Top 30", and continues to this day to be a popular song, especially among those of us who are a "certain age".

Ahhhh....the carefree days of Tod and Buz, cruising the USA in their Chevrolet. Simpler, happier times........


Enjoy!

I Sure Am Glad It Was Trash Day Today

Because I started this morning with two empty trash bins, one for "recyclable" stuff, and one for everything else.

The recycle bin is already about half full of cut-up, smashed flat cardboard boxes and misc packing material, and the regular trash bin is about one-quarter full.

I'm taking the advice of one of my friends over on the Celica Supra forum; drag it all out, sort it, and then rearrange it as you put it back in.

So far, I've found another Heathkit receiver (a GR-78) I bought and forgot about, a Commodore 1571 disk drive with cables, two Commodore power supplies, both new-in-box, all the cables I've made over the years to connect various radios I've owned and still own to both an AEA Commodore Packet Radio modem, and my Kantronics KPC-3+, and several more boxes containing all the leftover stuff that you never use, but they include in the box a new PC motherboard comes in.

At least I can now have the big door open, and walk from there to the front of the garage, so it's a big improvement.

My current SWAG is that I'm about 21% to where I need to be.

And I haven't gotten to the workbench area, and the shelving along the walls....

Gonna be a long, slow, slog........

The Never Ending Garage Clean Up Continues.......

Man, I should have done this two years ago when I bought the car. Then you'd be reading my gripes about me actually working on the car vs getting the damn garage cleaned out.

Made a pretty big dent the last couple of days. At this point I'll take a SWAG and say I'm 20% to where I need to be.

I'm glad tomorrow is trash day, as I've completely filled (packed pretty tight, too) the "Recycle" bin with empty, flattened out cardboard boxes, and misc bits and pieces of "stuff" that are allowed in that bin, and the regular bin that gets everything else.

I finally got my two Dahlquist DQM-9 speakers out of there. They'll be going on the back porch for now until I get them listed on weirdoslist craigslist for sale.

If anybody "local" is interested in them, drop me a line and we'll talk. I got them from a very good friend who takes fanatical care of his equipment. He just had new foam edge surrounds (outer edge of the cones) installed by Dahlquist right before I bought them, and the cabinets look like new.

And I consolidated about 10~12 other boxes of small items (mostly computer stuff) into three boxes, meaning there's a lot less wasted space.

I still don't know what I'm going to do with all the PC bits and pieces I have; perhaps just sell them in "lots" on eBay. Stuff like that I won't list on weirdoslist craigslist because of previous bad experiences selling computer stuff there. Every single person who came to look at the stuff I had wanted to offer me me pennies on the dollar for brand-new parts and completely rebuilt and upgraded PC's.

I know what the "retail" value of the stuff is, and offering me $20 for something easily worth $200 is an insult. The $200 price I had on things was well under "retail", and even the flippers that came to look at it knew that, yet insisted on low-balling me to the extreme.

Oh, well....dinner time here, and then back out to the other end of the garage. At least I have free access to my two big rolling tool boxes now, and I can get to the shelving units behind them, and start going through all that stuff..........

Minuteman III Launch Tonight From VAFB

From one of my groups.........

The following is a media advisory from Vandenberg AFB:

FOR IMMEDIATE RELEASE
From: 30th Space Wing Public Affairs, www.vandenberg.af.mil

MINUTEMAN III LAUNCH SCHEDULED

VANDENBERG AIR FORCE BASE, Calif. - - An operational test launch of an Air Force Global Strike Command unarmed Minuteman III intercontinental ballistic missile is scheduled between 11:00 p.m. PST Saturday, Feb. 20 and 5:00 a.m. PST Sunday, Feb. 21, 2016, from north Vandenberg Air Force Base.

The purpose of the ICBM test launch program is to validate and verify the effectiveness, readiness and accuracy of the weapon system, according to Air Force Global Strike Command.

Col. J. Christopher Moss, 30th Space Wing commander, is the launch decision authority.

"This mission continues a long string of vital ICBM flight tests from
Vandenberg Air Force Base," said Moss. "The launch not only demonstrates the capability of the Minuteman III weapon system, but also the tremendous capabilities of Airmen who maintain and operate it. The men and women of the 30th Space Wing are proud to partner with the Air Force Global Strike Command team to conduct this important launch."

The launch team, under the direction of the 576th Flight Test Squadron,
includes aircrew members from the 625th Strategic Operations Squadron, Offutt AFB, Nebraska, and crew members and maintainers from the 91st Missile Wing, Minot AFB, North Dakota.

The 576th FLTS is responsible for installed tracking, telemetry and command destruct systems on the missile, which collect data and ensure safety requirements, are met.

If you're out here on the Left Coast, and have the time to sit and just watch for a few hours, these are spectacular to see.

Rainy Wednesday/Thursday and Garage Cleaning

We need the rain, and I like sleeping when it's raining.

Got around half an inch, and the temperature dropped 10 degrees or so.

Dried out today, but a bit chilly (for Kaliforniastan!), so wearing a jacket while I'm going through boxes of stuff in the garage that haven't seen the light of day in quite a while.

Man, I didn't know I had so much stuff for repairing PC's!

I've got 30+ cooling fans of various sizes used to replace faulty power supply, CPU, and case fans, 30 or more Intel PCI 10/100Base-T Ethernet cards (remember when motherboards did NOT come with built-in Ethernet?), half a dozen or so sound cards, and a wide selection of video cards, with interfaces running the gamut from PCI to AGP, to PCIe, four 500 Watt "AT" power supplies, and all of this stuff is brand new.

I even have a few brand new 5-1/4" floppy drives, along with a good sized stack of 3-1/2" floppy drives.

And BOXES of memory going back to pre SDRAM stuff like "EDO" memory.

Don't have too many processors, except ones that were in the few motherboards I have. Mostly AMD K6 processors, as I was really hot into the "Socket 7" and "Super Socket 7" stuff.

The "rarest" processor I have would be a K6-III+ with a rated clock speed of 550 MHz. Not too many of those were released, and I'm not sure how I got it.

I suppose if I hang on to this stuff the price will go up, but for now, it's just a huge collection of memories from early days of building, repairing, and modifying PC's.......

Iowa Transmitters NOT On-The-Air Today. Next Post About This Will Occur When We're Actually OTA.....

This is getting frustrating, but I won't vent here.

Next time I post about this will be when I'm on-the-air!

PERIOD.......

OK, Let's Try This Again...Battleship Iowa's 1980's Transmitters to be ON-THE-AIR Wednesday 17 Feb 16

Well....I'm pretty sure I've got everybody on the same page for this.

We'll either be on 20 Meters around 14.261 or 17 Meters around 18.161, +/- any QRM.

All the equipment is working, I'm going to be giving the guys in the Gray Radio Gang some training in "Good Amateur Operating Practice" (most of them don't have stations at home), and then we should get OTA shortly after lunch, around 1300 local time, until about 1600, or 2100 UTC to 0000 UTC.

If you hear us, please bear with us. We won't be using the NI6BB callsign, but we will announce that we're operating from the Battleship Iowa.

I'm taking my tablet, and if I can get the damn Blogger software to cooperate, I'll post here that we're on, and we'll also self spot ourselves on the DX clusters.

Keep your fingers crossed!

Been Busy Tinkering on the Supra

"Supras In Vegas" is coming again this year, and I plan to have the car ready to go.

It's the 3rd week in September, which gives me about seven months to:

Replace the carpet, install the new stereo and speakers, and put the interior back together. I'll do a good cleaning of the floor under the old carpet, as I'm sure there's a ton of crud under the old carpet. While the front seats are out it will also give me access to the bracket that holds the levers for opening the rear hatch and gas filler door so I can bolt it back to the floor pan. It's currently adrift, and makes it a PITA to use.

Rebuild the front suspension with new KYB strut inserts, top strut mounts, springs that lower the car about 1", rebuilt power steering rack and pinion, new polyurethane bushings, and new rotors/calipers/wheel bearings. The new rotors are the drilled/slotted type, and are supposed to run cooler. One of the things Car and Driver noticed in their long-term test back in 1983 was that the rotors had a tendency to warp, so hopefully 30+ years of advances in rotor metallurgy and brake pad compounds will prevent that from occurring. I'm replacing the OEM rubber brake lines with stainless steel brake lines, and I'll flush and refill the brake system with "DOT 4" brake fluid. While I'm under the car I'll also replace the clutch slave cylinder, replace the OEM rubber clutch hydraulic line with a stainless one, and flush and refill the system with "DOT 4" fluid. The clutch master cylinder was replaced shortly before I bought the car, and the fluid is still "clear", so the master cylinder can stay for now.

Replace the cam drive belt and idler, and the water pump while the front is off the engine. Also replace all the coolant hoses and A/C, alternator drive belts. There's a hose that runs under the intake manifold/air plenum that needs to be replaced on a somewhat regular interval. It's called the "suicide hose", because if it blows, you've got about 60 seconds to shut the engine down before it overheats, usually blowing the head gasket in the process. If all it does is blow the head gasket you can consider yourself lucky. If you keep going, the head will warp, and replacement heads for this engine have been "unobtainium" for some years now.

Replace the rear shocks with new KYB shocks, replace the springs with new ones that lower the car about 3/4", and replace the upper and lower spring mounts (aka "the rubbers"). Also replace the rotors and calipers and OEM brake hoses with stainless steel ones.

And to help matters along, I just returned from Home Depot with some new light fixtures, and a box of bulbs.

I *had* a couple of cheep two-bulb, 48" lights hanging, but when the kids moved out, one of them mysteriously disappeared. I found another one in the garage, but it doesn't have an ON/OFF pull chain, so it will probably go in the scrap pile.

The new lights hanging off to the sides of the car are four-bulb 48" fixtures, and I bought a new 48" high-brightness LED fixture for hanging over the workbench.

The original two-bulb fixtures will be relocated to the rear (toward the big door) of the garage so I can get some light back there.

And of course, I'm back to cleaning the garage (again!) because of all the cruft my wife has "stored" in there.

How come MY stuff is always "junk that should be thrown away", but HER stuff is "Ohhh...we have to keep that!"??

AND finally, we're really going to try and get the Iowa's radio gear on-the-air this coming Wednesday.

I'll take my tablet and post from the ship if we mange to get everybody on the same page to do this.


For those that have asked, here's the original post from when I brought the Supra home:

 http://every-blade-of-grass.blogspot.com/2014/01/new-project-for-new-year.html