"
Supras In Vegas" is coming again this year, and I plan to have the car ready to go.
It's the 3rd week in September, which gives me about seven months to:
Replace the carpet, install the new stereo and speakers, and put the interior back together. I'll do a good cleaning of the floor under the old carpet, as I'm sure there's a ton of crud under the old carpet. While the front seats are out it will also give me access to the bracket that holds the levers for opening the rear hatch and gas filler door so I can bolt it back to the floor pan. It's currently adrift, and makes it a PITA to use.
Rebuild the front suspension with new KYB strut inserts, top strut mounts, springs that lower the car about 1", rebuilt power steering rack and pinion, new polyurethane bushings, and new rotors/calipers/wheel bearings. The new rotors are the drilled/slotted type, and are supposed to run cooler. One of the things
Car and Driver noticed in their long-term test back in 1983 was that the rotors had a tendency to warp, so hopefully 30+ years of advances in rotor metallurgy and brake pad compounds will prevent that from occurring. I'm replacing the OEM rubber brake lines with stainless steel brake lines, and I'll flush and refill the brake system with "DOT 4" brake fluid. While I'm under the car I'll also replace the clutch slave cylinder, replace the OEM rubber clutch hydraulic line with a stainless one, and flush and refill the system with "DOT 4" fluid. The clutch master cylinder was replaced shortly before I bought the car, and the fluid is still "clear", so the master cylinder can stay for now.
Replace the cam drive belt and idler, and the water pump while the front is off the engine. Also replace all the coolant hoses and A/C, alternator drive belts. There's a hose that runs under the intake manifold/air plenum that needs to be replaced on a somewhat regular interval. It's called the "suicide hose", because if it blows, you've got about 60 seconds to shut the engine down before it overheats, usually blowing the head gasket in the process. If all it does is blow the head gasket you can consider yourself lucky. If you keep going, the head
will warp, and replacement heads for this engine have been "unobtainium" for some years now.
Replace the rear shocks with new KYB shocks, replace the springs with new ones that lower the car about 3/4", and replace the upper and lower spring mounts (aka "the rubbers"). Also replace the rotors and calipers and OEM brake hoses with stainless steel ones.
And to help matters along, I just returned from Home Depot with some new light fixtures, and a box of bulbs.
I *had* a couple of cheep two-bulb, 48" lights hanging, but when the kids moved out, one of them mysteriously disappeared. I found another one in the garage, but it doesn't have an ON/OFF pull chain, so it will probably go in the scrap pile.
The new lights hanging off to the sides of the car are four-bulb 48" fixtures, and I bought a new 48" high-brightness LED fixture for hanging over the workbench.
The original two-bulb fixtures will be relocated to the rear (toward the big door) of the garage so I can get some light back there.
And of course, I'm back to cleaning the garage (again!) because of all the cruft my wife has "stored" in there.
How come MY stuff is always "junk that should be thrown away", but HER stuff is "Ohhh...we
have to keep that!"??
AND finally, we're really going to try and get the Iowa's radio gear on-the-air this coming Wednesday.
I'll take my tablet and post from the ship if we mange to get everybody on the same page to do this.
For those that have asked, here's the original post from when I brought the Supra home:
http://every-blade-of-grass.blogspot.com/2014/01/new-project-for-new-year.html