Busy Weekend Coming Up

Well, let's see....

Saturday morning I have the "First Saturday Of The Month" breakfast with the radio club I'll be bailing out on (long rant, check the older posts), and then I'll be helping with another "NRA First Steps" pistol class, then a reunion party for a bunch of my former work mates from the satellite launch place I retired/got laid-off from, and then I'll be on the Iowa all day Sunday for the Pearl Harbor Memorial.

I'll be wearing one of my "NRA Certified Instructor" shirts to the breakfast, which will probably pop the fuses in the one Ultra-Liberal, Politically Correct member we have.

Oh, well.....no use trying to please everyone.

Rainy Day on the Iowa

Spent today aboard doing Grey Radio stuff, mostly reading the manuals, as yours truly has been "appointed" as the Lead Technician to get the original transmitters fired back up.

So, after helping the 70 and 80 year old guys go down to Broadway in search of some replacement parts for one of the "Red Phones", I spent some reading the manuals on the exciter, power amplifier, and the auto-couplers.

I learned that the exciter only puts out around 100 mW (+20dBm), and the high voltage in the power amp is 2250 Volts.

The amps are capable of running up to 1500 Watts output, but the manual cautions to not go over 1250 Watts, which is a kick because EACH of the power tubes is rated for about 5kW plate dissipation!

Man, talk about OVER designed!

And then I helped the Old Guys (I'm a youngster there!) work on the "Coke Machine", which is this beautifully built rack of equipment (Hughes Aircraft in Irvine, CA built it) that basically a switching matrix to route secure and non-secure communications around the ship.

I ponied up for a big 24VDC power supply so they could get parts of it working, but ALL of the circuit cards were pulled from it while it was in the Mothball Fleet, as it's a system still in use.

None of it's classified, and we're having a hard time finding stuff for it.

Anybody have any "1149570 TIM Manual Patch Cards", or "1149565 LIM Manual Patch Card" spares just sitting around?

Sure would make it easier to set up the manual patches we need to make so we can route audio from the "Red Phones" to and from the Radio Room and Transmitter Room.......

A Little Rainy Day Music

By Bachman Turner Overdrive.

This is one of their lesser know songs.

Has some really nice guitar work.

Enjoy!

Rain!

And boy, we need it!

It started raining about 0500 this morning, and is supposed to keep up through Wednesday morning.

So far it's been a nice, steady rain, with the rain gauge showing .39" since this storm began, but it's starting to pool in all the low spots in the backyard, and the scanner has a lot of traffic about road closures due to flooding.

No word on any mud slides, though.

And the dog, who doesn't like to go out in the rain, is in "Max Bladder Hold Mode" right now. She'll go scratch at the door, I'll open it, and she sticks her head out the door, looks up at me, and heads back in the house.

As soon as it beaks a bit, I'll grab her and get her to go out, whether she likes it or not.

AND, we're up to .93" since midnight, which is quite a bit for us to get all at once.

Visio 2010 Is A MAJOR PITA!!

God, I can't believe how freaking AWFUL this software is.

I've been using Visio for over 10 years, I've mad over 100 drawings with it, and it seems like every single time I stop using it for a few weeks, I have to learn it all over again.

Even doing something simple like changing the default line weight is cumbersome, and the changes you make don't carry over to the individual stencils/shapes stored in your library.

The earlier versions at least had the menus laid out in a logical manner, but nooooo, that wasn't good enough for Micro$oft, and they changed everything around, and I can't find sh1t in their newer structure.

IfI have to bang my head against the keyboard until Its bloody learning this POS software again, I'll just take the time to learn one of the Linux vector drawing programs I have, as they don't change things around on a whim.

Either that or I'll just make the damn drawings by hand, scan them, and convert them to a pdf for distribution.

Gawd.......what a pain this little project has become!

UPDATE

Did the entire project in about 35 minutes using "gschem" on my Linux box, and I'd never used the program before.

It reminds me a lot of the free software (Windoze only) that PCBExpress gives you to do your boards.

Since this will be hand-wired, and I don't need boards produced, I just wanted a nice looking schematic to go into the operating manual.

The project is an interface board from a sound card on a PC to a Kenwood HF radio so we can do "Digital Modes" on the Iowa.

Here's a copy of the schematic, but it didn't render very cleanly when I did a quickie rendering from PostScript to PNG format.

Rain On The Way....YAY!

Heavy overcast this morning, and I can smell rain on the wind.

NOAA forecast is for scattered showers today and tonight, haevy rain starting Monday night through Wednesday morning.

We sure need the rain, and hopefully we'll have a wet winter.

It's been extremely dry out here the last 5 years or so, and the reservoirs are down to their lowest levels in 20 years.

This afternoon's satellite view:

Happy Thanksgiving

Hope you all have a very Happy Thanksgiving!

Fairly Quiet Out Here In La-La Land

Been listening to scanner most of the night.

Well, actually THREE scanners.

One is set up to scan most everything out here.

One is set up to scan the "Media" frequency assignment, which are those channels the news crews and news choppers use.

And one to scan just the stuff for Long Beach and Signal Hill.

Why three?

Well, the "main" scanner has so many channels to scan that it might stop on something trivial, like a call about a burglar alarm, and miss something big, like a "peaceful protest" that turns ugly.

The "Media" scanner is interesting, as these guys talk to each other the way you and I would, and don't pull any punches about what's going on.

And the "Local" scanner, since it has fewer channels to scan, can rip through the entire channel list in nothing flat, and not miss anything close by.

So far the only signs of Bad Shit going on is the chatter on the LAPD and LASD channels about groups of people throwing stuff on to cars from freeway overpasses.

There are several "large crowds" marching around, but other than the people tossing stuff from overpasses, I'd say it's relatively quiet.

There has been an unusual amount of radio traffic down in the port area, though. Mostly vehicle stops, and most of the people stopped are from out of the area, so not sure if that means anything.....

Beem Busy Again.....

Had a ton of yard work to do this last week, along with doing some "deep cleaning" of various parts of the house, as we're having guests over for Thanksgiving.

And I dug out, scrubbed up, and tested some older radio gear that I'm giving to a friend who's just about ready to take his General Class Amateur Radio exam.

The gear is a complete Yaesu FT-310 with power supply/speaker, microphone, and an external VFO that was entrusted to me by my buddy The Wandering Minstrel, with the promise to him that's find it a good home.

This isn't the radio, but it's representative of the model type.

And the soon-to-be General Class ham was thrilled to get it, and thanked me profusely.

I mowed the back yard with my little electric mower, edged the driveway and walkways, and used the weed whacker to get all the stuff along the side of the house that the mower can't get.

I went to Home Depot and got six BIG bags of black dirt (next time I think I just have a half truckload delivered!), and filled in a bunch of low spots, and seeded/watered the areas. And I put out stakes with string between them and strips of yellow caution tape hanging on the string to keep Pebbles The Wonder Dog from "exploring" these new areas.

A couple of shouts of "NO!" has convinced her (so far) to keep away from them.

I really let the back yard "go to seed" this last year, hardly watering it, and it died out in big sections. When we had Swisher, he and Pebbles would chase each other around the yard, chewing up the dead grass, leaving bare spots that turned into mini-dust-bowls, so hopefully with some fresh dirt and grass seed, it will come back this winter.

Sad Puppy!

Well, Little Miss Pebbles had a vet visit on Monday.

She's had a mild case of conjunctivitis, which we thought cleared up from the eye drops given to us at the previous vet visit, but it came back, this time in both her eyes.

And she has these "bumps" on her back that look like insect bites, very unusual for this time of year here. I spray the back yard twice a year for fleas, ticks, and other critters, and we use Advantage flea treatment on her, so we weren't sure what was going on.

And the day before I took her back in, she started licking her left front paw, and would pull it back from me when I went to look at it.

Time to go see Dr. Grain over at the Evening Pet Clinic again!

I can't say enough good things about the pet clinic. They really care about their little furry (and feathered!) patients there, and treat you like family when you show up.

After I checked in and was waiting, I noticed on of the nails on her left paw seemed to be red, maybe bleeding a bit, and then I remembered what had happened several days before.

I was bringing in a bunch of stuff from the car, and couldn't see where my big feet were going, and stepped on one of her front paws! Normally this hasn't been a problem, as she's quicker on her feet than I am on mine, and the carpet cushions it some.

Well, this time I stepped on her when she was right at the door, on the hardwood entry area. She didn't yelp or cry or anything, and I dropped what I was doing and called her back, She wasn't limping, and didn't seem to be in any pain, so I apologized to her (apologize to a dog?) and didn't think much of it.

When I hoisted her up to the exam table. though, the Doctor and I immediately noticed one of her nails was broken right where the fur stops and the nail begins.

SO, he removed the broken nail, swabbed the area with Providone Iodine, and wrapped it up, saying to leave it covered for 5 days so it would "seal up" and not get infected.

And then we put "The Cone" on her, to (TRY and) keep her from licking/chewing/tearing off the bandage on the paw.

And the good Doctor says the bumps are most likely allergies to some type of insect bite, and to give a Benadryl twice a day.

So, here she is looking a bit upset over having a bandaged foot, AND a cone her.

Poor puppy.....

Belated Happy Veteran's Day

To all who have served, and are currently serving....

You my have deepest gratitude and respect for your service to our country.

I had a post scheduled, but must have messed something up, as it didn't post.

I would have posted this morning, but I spent the entire day on the Iowa helping with tours, and assisting a film crew, but mostly operating NI6BB.

We had a very nice memorial service and wreath ceremony this morning at 0900, before the ship opened to the public.

And since there's a film crew aboard, some of the tour route was changed, resulting in a few people getting "lost" a bit, and having to be shepherded back onto the tour route, and out of the areas not normally open to the public.

When I got to the starboard side hatch for the Communications Center this morning, the hatch was closed, but not dogged.

I didn't realize how heavy the hatch was, having never opened it before. It swings easily on the hinges, but has a lot of mass, so getting it moving, and stopping it again, took a bit of muscle.


Hope y'all had a great day!