The Last Transistor, and associated "extra" components, has been replaced. I verified my work with a checklist, and it's very close to being powered up. I have some tidying up to do, along with cleaning the soldering flux off the back of the PA Board, and I'll do that tomorrow with fresh eyes.
And I finally bought a decent workbench for the garage. Now I have a place to mount a proper bench vise, belt/disc sander, bench grinder, and a drill press.
Stand by for pix!
%20American%20Airlines%20Flight%20Tracking%20and%20History%2004-Aug-2024%20(KDFW-KEGE)%20-%20FlightAware.png){kind=tracking}
I'm looking forward to the Fisher smoke test. Good Luck!
ReplyDeleteShould know in the next day or so.
DeleteHow soon will you get a lathe and start building your own Supra parts?
ReplyDeleteLathe? I'd need a six-axis CNC Machining Center!
ReplyDeleteSeems you can buy several different ones for under $40,000. Surely SLW will go along with that.
DeleteBut then I'd have no place to park the Supra!
DeleteRent a building! 😁
DeleteBut then I'd have to work again to pay for it all!
Delete