RATS! Dead Battery in the Jeep....

Ran out to Walgreen's last night to get a magazine ("Super Street", not the kind of car mag I typically buy) that has coverage of the "Supras in Vegas" event.

Came out of the store and BZZZZZZT! when I turned the key to start the Jeep.

Called my wife, who got dressed and came to the store (God bless her heart!) so I could jump the Jeep from her little car. Got the Jeep started and drove around for a bit to put some charge in the battery.

Got home, and ALL the parking spots on the street were gone!

That's a post I've been wanting to write, but hadn't been ticked off enough to do.

Coming Soon!

Had to pull her car all the way up to the driveway gate, and then crept the Jeep up right behind her. Turned it off and tried to restart it and BZZZZZZZT!

SO....this morning I took my super-duper-charge-any-battery-known-to-man charger to the Jeep, pulled the connections to the battery, and connected the charger.

The charger went into "analyze" mode, declared the battery to "OK", and then started charging. The state-of-charge as measured by the charger was only 65%, BUT I noticed the battery clamps were somewhat loose on the battery posts when I hooked up the charger.

Absolutely NO corrosion on them, as I greased them pretty well when I put this battery in the Jeep a few years ago.

Hopefully it's just a case of the battery clamps loosening up over time, and things will be OK again after the battery charges up, and I properly tighten the clamps.

This model Jeep uses an obscure size battery, and last time I replaced it cost around $200. It's the biggest battery I've ever seen in a passenger car, and looks like it belongs in an 18-wheeler.

***UPDATE***

Well, it's not the starter. Charged to 100%, and all I get is the BZZZZT!

Jumped it with my mammoth Optima "Yellow Top" I use for my portable solar-powered Ham operation, and it started right up.

THREE times it started flawlessly.

Connected the charger back up, and charged to 100% again. Disconnected the charger and no start. And after ONE attempt to start it, the charger showed that the state-of-charge had gone from 100% back down to 65%!

Looks like it developed a bad cell, literally overnight.

Obamas Legacy.....

The wife and I are off to the "Crew Appreciation **Christmas** Dinner" onboard the Iowa tonight, so I thought I'd leave you with this little video, passed on to me by a good friend.

Enjoy!

Rain and Cold Weather for L.A.

So far the rain gauge says about .15" over the last several hours. NWS claims we could get 1" to THREE inches of rain tonight. That's a whole lot in such a short time for out here. Most of the soil here is adobe, a clay/sand/"black dirt" mix, and after an inch of rain or so, not much soaks in, and it starts to pool and run off.

And I know "cold" is a very relative term (just ask Rev Paul!), but THIRTY SEVEN degrees and raining in SoCal is a bit "unpleasant" for the natives.

Just hope we don't start getting mudslide in whatever burn areas there are this year.....

Virgin Galactic's "SpaceShipTwo" Completes Suscessful Glide Test

Full story here at SatNews.

Hard to believe it's been two years since they lost the first one due to an inadvertent pilot error.

 

For those that don't know the history of this interesting mothership/spacecraft combination, here's the article at the Wikipedia.

Pearl Harbor Day on the Iowa

Had a great time today playing radio on the Iowa, and also the somber experience of the ceremonies held in commemoration of 7 December, 1941.

The press was everywhere for the noon time ceremonies, and if you live in the L.A. area I'm sure you'll see it on the news.

We made well over 300 contacts using the "regular" Amateur Radio equipment, but the guys running the 1980's era "legacy" Navy equipment had problems. Seems one of the R-1051 receivers we've been using has developed a problem with the frequency changing mechanism, a complex arrangement of gears, chains, and rotary switches.

It looks to be a simple problem, as these things go, just requiring a bit of jiggling one of the switches to wake the receiver up again, so I'm guessing dirty or slightly misaligned contacts. A bit of DeoxIT should clear it up, but getting the receiver apart enough to actually get at the contacts is a bit of a PITA. Fortunately we have a person who has restored several of these, so we're going to go through the required paperwork to get it off the ship and let him go through it. We have the complete service manuals for it, and a good supply of spares he can use. We really don't have the facilities on the ship anymore to drag it to the Electronic Repair Shop and do it there, as all the test equipment was removed before the ship went into the Reserve Fleet.

The legacy transmitters we've been using have been working 100%, and we now have a "new" antenna, with an autocoupler, for use with the legacy transmitters, and just having the autocoupler makes using them much easier, as we don't have to manually adjust an antenna coupler for lowest reflected power when we change frequencies.

Election Post Mortem: Tucker Carlson Makes a New York Slimes Columnist Really Squirm

This is great! The only other thing I've seen that's this good is the NewsWeek Managing Editor squirming around try to explain not only how their "Madam President" issue went out in error, but why it was so stridently anti Trump, and some would say anti American.

Hint:......NewsWeek doesn't produce their own "Commemorative Issues"!

I'll post that one later on.

In the meantime....enjoy this twit from the New York Slimes getting raked over the coals.....

'Tis The Season!

Shamelessly borrowed from Irish......

Scopes for Air Rifles?

A very good friend of mine has a really nice 22 cal air rifle. I forget what brand it is, but it cost him around $450, and got very good online reviews on several of the air rifle forums, and it's served him well in keeping the rabbit population under control on his vegtable farm.

WELL......he dropped it a couple of weeks ago, and the optics on the (CHEEP!) scope got knocked out of alignment to the point that when I looked through it, instead of seeing a round circle of light, I saw an oval.

And it kind of rattled a bit when you shook it...

So, I gave him the scope that came from Marlin on my 336 (I replaced it with a Nikon scope), along with several sets of rings of various heights so he could get it mounted to his preference. I helped him sight it in, and all is well. The rifle is a real ass kicker for an air rifle, and will punch clean through one side of a galvanized trash can, and almost through the other side at 25 yards. Pretty impressive to my thinking!

HOWEVER....he keeps reading on the forums that you need to use a specially designed scope made specifically for air rifles to withstand the back-and-forth shock that comes from the piston slamming forward to compress the air, and then the recoil from the pellet going out the barrel.

I'd never heard of that before. Can anybody with air rifle experience shed some light here, or is it just an "Internet Myth"?

He's worried that that "expensive" scope I gave him will get damaged, and even though I don't want the scope back, I'd like some info to put his mind at ease.....

One Upsmanship.....

From an email a buddy on the Iowa sent....

I know it's fake, but it's funny, too....

Not Much Here; Carry On!

Just been cleaning up the Radio Room a bit, mostly sorting through all the magazines (the paper kind) that have stacked up, and deciding which ones to keep, and which to dump.

I'll probably box up the car mags I don't want and ship them to one of my friends back in Illinois. Not too expensive if you use Media Mail, but it can take up to 3 weeks to get there from here.

And I've dug up a bunch of electronic items for eBay. I've got one of the original "FunCube Dongles" that's basically an SDR receiver-on-a-stick, and is the one that kicked off the whole "Cheap SDR" craze. Far better than a $20 dongle as it should be, as it was about $150 when I bought it.

The little "SDRplay" will also go on the block, as the AirSpy outperforms it by a wide margin.

A couple of RCA and Heathkit VTVMs, a couple of Heathkit Code Practice Oscillators and a Heathkit electronic keyer will go, along with some Toyota suspension parts I bought that are just too track focused to be relevant to street operation. The urethane bushings I installed are plenty "good enough" for my car, and I really don't think the Techno Toy Tuning track control rods, with their spherical rod ends in place of compliant bushings, would work OK on the street. The car I rode in that had them would rattle the fillings out of your teeth, and I don't want that.

I'll get started in on the garage cleaning (again....it's a never ending battle) on Sunday, and probably wind up with full "garbage" and "recycle" bins for Monday's trash pick up.

We used the last one of our "Large Item" free pick-ups for the year from the city last week, and got rid of a 75 gallon fish tank, some furniture that had been left outside and was deteriorated rather badly, and a "glider" type swinging chair/bench. It's like a porch swing, but has it's own frame so you can put it any where flat. That was gone before the city truck even got here, as we have some "junque dealers" who prowl the streets looking for items like that that can be refurbished, and sold at swap meets, or kept for their own use.

ANY large item made of metal will disappear, sometimes in minutes depending on what day of the week it is, and I doubted that item would make the city truck before it got here. It just needed a new canvas awning, it had no rust on it, and probably made the guy who picked it up smile.

Interview Wirh General Mattis

This is about 40 minutes long, and worth every second of your time.

I think President Elect Trump has made a wise choice....





And I just saw this over at the Western Rifle Shooters Association: